The Sarpaws Automatic Cat Feeder ensures your cat is fed on time, even when you’re away. This step-by-step guide will help you set up, program, and maintain your automatic cat feeder with ease. Learn how to power the device, schedule meals, record voice messages, and troubleshoot common issues. Follow these simple instructions to keep your cat’s feeding routine consistent and hassle-free. 🐾
Step 1: Unboxing and Setup
- Unbox the Product: Remove the Sarpaws Automatic Cat Feeder and Cat Water Dispenser FW1 from its packaging. Ensure all components are included:
- Automatic feeder unit
- Stainless steel food bowl
- Water dispenser
- Desiccant bag
- Power adapter
- Instruction manual
- Choose a Location: Place the feeder and water dispenser in a quiet, stable, and accessible location for your pet. Ensure it is near a power outlet if using the wired option.
Step 2: Assemble the Feeder
- Attach the Food Bowl: Secure the stainless steel food bowl to the base of the feeder.
- Insert the Desiccant Bag: Place the desiccant bag inside the food storage compartment to keep the food fresh and dry.
- Fill the Food Container: Open the locking lid and fill the 3-liter food storage compartment with dry kibble. Ensure the lid is securely locked to prevent pets from accessing the food.
Step 3: Set Up the Water Dispenser
- Fill the Water Dispenser: Fill the water dispenser with fresh, clean water. The oxygenated water feature ensures your pet stays hydrated and healthy.
- Place the Water Dispenser: Position the water dispenser next to the feeder for easy access.
Step 4: Power the Feeder
- Plug in the Power Adapter: Connect the power adapter to the feeder and plug it into a power outlet.
- Insert Backup Batteries (Optional): For power outage protection, insert 3 D-cell batteries (not included) into the battery compartment. This ensures the feeder continues to operate during blackouts.
Step 5: Program the Feeder
- Set the Clock: Press the “Clock” button and use the “+” and “-” buttons to set the current time.
- Schedule Meals:
- Press the “Meal” button to select the meal number (up to 4 meals per day).
- Use the “+” and “-” buttons to set the portion size for each meal (1-10 portions).
- Press the “Time” button to set the feeding time for each meal.
- Save Settings: Once all meals are programmed, press the “Set” button to save your settings.
Step 6: Record a Voice Message
- Press the “Record” Button: Hold down the “Record” button and speak into the microphone to record a 10-second message (e.g., “Come on, baby, it’s dinner time!”).
- Playback the Message: Press the “Play” button to ensure your message is clear and audible.
Step 7: Test the Feeder
- Manual Feeding Test: Press the “Manual” button to dispense food and ensure the feeder is working correctly.
- Check the Water Dispenser: Ensure the water dispenser is functioning and providing a steady flow of fresh water.
Step 8: Maintenance and Cleaning
- Clean the Food Bowl and Water Dispenser: Regularly wash the stainless steel bowl and water dispenser with warm, soapy water to maintain hygiene.
- Refill Food and Water: Check and refill the food and water as needed.
- Replace the Desiccant Bag: Replace the desiccant bag every 2-3 weeks to keep the food fresh.
Step 9: Troubleshooting
❌ Feeder Not Dispensing Food?
✔ Check for food jams in the dispenser.
✔ Ensure the feeder has power (check the adapter and batteries).
✔ Reset the device and reprogram the schedule.
❌ Voice Recording Not Working?
✔ Make sure the mic button was held long enough.
✔ Ensure the speaker isn’t obstructed.
Step 10: Enjoy Peace of Mind
With the Sarpaws Automatic Cat Feeder and Cat Water Dispenser FW1, your pet will enjoy timely meals and fresh water, even when you’re away. Spend more quality time with your furry friend, knowing they are well cared for!
Final Notes
✅ Use only dry cat food within the recommended kibble size.
✅ Clean the feeder regularly to prevent clogging.
✅ Keep batteries installed for power backup.
